Dodavatel trubek z nerezové oceli Wenzhou Kaixin Čína
A butt weld 45 degree long radius elbow is a type of pipe fitting that is used to change the direction of the flow in a piping system by 45 degrees. It is designed with a long radius, which means that the curvature of the elbow is relatively gentle, allowing for a smoother flow of fluid through the system. Butt weld 45 degree long radius elbows are made by welding two pipes or tubes together at a 45 degree angle, with the weld seam being flush with the surface of the elbow. They are commonly used in industries such as oil and gas, petrochemicals, and power generation to connect pipes and redirect the flow of fluids around obstacles or through corners.
Butt weld Fitting 45° Long Radius Elbow Specification
| Normy | ANSI/ASME :ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43.
Z : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 V : EN10253-1, EN10253-2 |
| Naplánovat | Rozvrh 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS atd. |
| Velikosti | Seamless 45° Long Radius Elbow Size: 1/2″~24″
AKR / Svařované / Fabricated 45° Long Radius Elbow Size: 1/2″ (15 NB) to 48″ (1200NB) |
| Známky | 304/L/H/LN, 316/L/H/LN/Ti, 321/H, 317/L/LN, 347/H, 310S/H, N08904(904L), S31803, S32205, S32750, S32760, N02200, N02201, N04400, N06600, N06690, N06625, N06985(G3), N08028, N08800, N08810, N08811, N08825 Povrch |
| Typ | Tupý svar (BW) / Svařované / AKR / Vyrobeno |
| Dimension | ANSI B16.9, ANSI B16.28, MSS-SP-43 Typ A, MSS-SP-43 Typ B, |
Butt weld Fitting 45° Long Radius Elbow MATERIAL & TŘÍDY
| Nerezová ocel Buttweld 45 Stupeň Dlouhý poloměr lokte | ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, Z 1.4301, DIN1.4306, Z 1.4401, Z 1.4404 |
| Duplex & Super duplexní ocelový buttweld 45 Stupeň Dlouhý poloměr lokte | ASTM A 815, ASME SA 815 US NO S31803, S32205. US S32750, S32950. Materiál č. 1.4462 |
| Buttweld z uhlíkové oceli 45 Stupeň Dlouhý poloměr lokte | ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70. |
| Nízkoteplotní uhlíková ocel 45 Stupeň Dlouhý poloměr lokte | ASTM A420 WPL3, A420 WPL6 |
| Buttweld z legované oceli 45 Stupeň Dlouhý poloměr lokte | ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 |
| Buttweld z niklové slitiny 45 Stupeň Dlouhý poloměr lokte | ASTM B336, ASME SB336, Nikl 200 (US No. Ne 2200), Nikl 201 (US No. N02201), Monel 400 (US No. N04400), Monel 500 (US No. N05500), Inconel 800 (US No. N08800), Inconel 825 (US No. N08825), Inconel 600 (US No. N06600), Inconel 625 (US No. N06625), Inconel 601 (US No. N06601), Hastelloy C 276 (US No. N10276), Slitina 20 (US No. N08020), Titan (třída I & II), měďnatý nikl 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe. |
Applications of 45 STUPNĚ DLOUHÝ RADIUS LOKET
- Stainless Steel 45° Long Radius Elbow uses in Oil and Gas Pipeline
- 45° Buttweld LR Elbow uses in Chemical Industry
- Alloy Steel 45° Long Radius Elbow uses in Plumbing
- 45° Long Radius Elbow Pipe Fittings uses in Food Processing Industry
- Buttweld 45° LR Elbow uses in Structural Pipe
- ANSI B16.9 Buttweld 45° Long Radius Elbow uses in Power Plant
- 45° Long Radius Pipe Elbow uses in Paper & Pulp Industry
- 45 Deg Long Radius Bend uses in Heating
- 45 Degree Long Radius Reducing Elbow uses in Water Supply Systems
- ASME B16.9 Long Radius 45 Deg Elbow uses in General Purpose Applications
- 45° LR Elbow uses in Fabrication Industry
45 Deg Long Radius Elbow Rozměry
Buttweld 45 Degree Long Radius Elbow Dimension Drawing
| NPS | O.D.
D |
90 degrees
Long Radius Center-to-End A |
45 degrees
Long Radius Center-to-End B |
90 degrees
3D Center-to-End A |
45 degrees
3D Center-to-End B |
| 1/2 | 21.3 | 38 | 16 | – | – |
| 3/4 | 26.7 | 38 | 19 | 57 | 24 |
| 1 | 33.4 | 38 | 22 | 76 | 31 |
| 1 ¼ | 42.2 | 48 | 25 | 95 | 39 |
| 1 ½ | 48.3 | 57 | 29 | 114 | 47 |
| 2 | 60.3 | 76 | 35 | 152 | 63 |
| 2 ½ | 73 | 95 | 44 | 190 | 79 |
| 3 | 88.9 | 114 | 51 | 229 | 95 |
| 3 ½ | 101.6 | 133 | 57 | 267 | 111 |
| 4 | 114.3 | 152 | 64 | 305 | 127 |
| 5 | 141.3 | 190 | 79 | 381 | 157 |
| 6 | 168.3 | 229 | 95 | 457 | 189 |
| 8 | 219.1 | 305 | 127 | 610 | 252 |
| 10 | 273 | 381 | 159 | 762 | 316 |
| 12 | 323.8 | 457 | 190 | 914 | 378 |
| 14 | 355.6 | 533 | 222 | 1067 | 441 |
| 16 | 406.4 | 610 | 254 | 1219 | 505 |
| 18 | 457 | 686 | 286 | 1372 | 568 |
| 20 | 508 | 762 | 318 | 1524 | 632 |
| 22 | 559 | 838 | 343 | 1676 | 694 |
| 24 | 610 | 914 | 381 | 1829 | 757 |
| 26 | 660 | 991 | 406 | 1981 | 821 |
| 28 | 711 | 1067 | 438 | 2134 | 883 |
| 30 | 762 | 1143 | 470 | 2286 | 964 |
| 32 | 813 | 1219 | 502 | 2438 | 1010 |
| 34 | 864 | 1295 | 533 | 2591 | 1073 |
| 36 | 914 | 1372 | 565 | 2743 | 1135 |
| 38 | 965 | 1448 | 600 | 2896 | 1200 |
| 40 | 1016 | 1524 | 632 | 3048 | 1264 |
| 42 | 1067 | 1600 | 660 | 3200 | 1326 |
| 44 | 1118 | 1676 | 695 | 3353 | 1389 |
| 46 | 1168 | 1753 | 727 | 3505 | 1453 |
| 48 | 1219 | 1829 | 759 | 3658 | 1516 |
ROZMĚROVÉ TOLERANCE 45 STUPNĚ DLOUHÝ RADIUS KOLENO – ASME B16.9
| DIMENSIONAL TOLERANCES – ELBOWS | |||||||
| For all fittings | Elbows 90/45 stupně | 180° Návraty | |||||
| Nominální velikost potrubí (NPS) | Vnější Ø
ve společnosti Bevel |
Uvnitř Ø
na konci |
Tloušťka stěny
t / t1 |
Center to End Dim. A-B-C-M | Center to Center Dim.
Ó |
Zpět na Face Dim.
K |
Zarovnat- ment of Ends
U |
| 1/2 A 2 1/2 | 1 | 0,8 | Ne | 2 | 7 | 7 | 1 |
| 3 A 3 1/2 | 1 | 1,6 | méně | 2 | 7 | 7 | 1 |
| 4 | +2 -1 | 1,6 | než | 2 | 7 | 7 | 1 |
| 5 A 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
| 8 | 2 | 1,6 | nominálních | 2 | 7 | 7 | 1 |
| 10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
| 12 A 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
| 20 A 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
| 26 A 30 | +7 -5 | 4,8 | 3 | ….. | ….. | ….. | |
| 32 A 48 | +7 -5 | 4,8 | 5 | ….. | ….. | ….. | |
ANGULARITY TOLERANCES OF 45 STUPNĚ DLOUHÝ RADIUS LOKET
| Angularity Tolerances | ||
| ND | Maximální úhel vypnutí | Max z letadla |
| Q | P | |
| 1/2 A 4 | 1 | 2 |
| 5 A 8 | 2 | 4 |
| 10 A 12 | 3 | 5 |
| 14 A 16 | 3 | 7 |
| 18 A 24 | 4 | 10 |
| 26 A 30 | 5 | 10 |
| 32 A 42 | 5 | 13 |
| 44 A 48 | 5 | 20 |
DOSTUPNÉ TYPY 45 STUPNĚ DLOUHÝ RADIUS LOKET
| Buttweld 45° Long Radius Elbow | Duplex Steel Buttweld 45° Long Radius Elbow |
| ASME B16.9 Butt weld 45° Long Radius Elbow | High Nickel Alloy 45° Long Radius Elbow |
| Stainless Steel 45° Long Radius Elbow | SS 45° Long Radius Elbow |
| High Quality 45° Long Radius Elbow | Seamless Butt weld 45° Long Radius Elbow |
| Welded Butt weld 45° Long Radius Elbowr | ASME B16.28 Buttweld 45° Long Radius Elbow |
| Carbon Steel 45° Long Radius Elbow | ANSI B16.9 Buttweld 45° Long Radius Elbow |
| Titanium Buttweld 45° Long Radius Elbow | Inconel Butt weld 45° Long Radius Elbow |
| ASTM A403 Stainless Steel 45° Long Radius Elbow | Butt Weld B16.9 45° Long Radius Elbow |
| Super Duplex Steel Buttweld 45° Long Radius Elbow | Copper Nickel 45° Long Radius Elbow |
| Steel 45° Long Radius Elbow | Hastelloy 45° Dlouhý poloměr lokte |
WEIGHT OF 45 Deg Long Radius Elbow
Buttweld Elbow Hmotnost in LBS and KG
| Type-> | SCHEDULE STD | SCHEDULE XS |
| NPS | LBS | KG | LBS | KG |
| 1/2 | 0.09 | 0.04 | 0.19 | 0.09 |
| 3/4 | 0.09 | 0.04 | 0.19 | 0.09 |
| 1 | 0.25 | 0.11 | 0.31 | 0.14 |
| 1 ¼ | 0.38 | 0.17 | 0.5 | 0.23 |
| 1 ½ | 0.4 | 0.18 | 0.69 | 0.31 |
| 2 | 0.81 | 0.37 | 1.19 | 0.54 |
| 2 ½ | 1.75 | 0.79 | 2.13 | 0.97 |
| 3 | 2.63 | 1.19 | 3.5 | 1.59 |
| 3 ½ | 3.5 | 1.59 | 4.5 | 2.04 |
| 4 | 4.5 | 2.04 | 6.1 | 2.77 |
| 5 | 7.5 | 3.4 | 10.7 | 4.85 |
| 6 | 12 | 5.44 | 17.5 | 7.94 |
| 8 | 23 | 10.43 | 35 | 15.88 |
| 10 | 43 | 19.5 | 53 | 24.04 |
| 12 | 62 | 28.12 | 84 | 38.1 |
| 14 | 80 | 36.29 | 100 | 45.36 |
| 16 | 100 | 45.36 | 135 | 61.23 |
| 18 | 126 | 57.15 | 167 | 75.75 |
| 20 | 160 | 72.57 | 206 | 93.44 |
| 22 | 197 | 89.36 | 260 | 117.93 |
| 24 | 238 | 107.95 | 300 | 136.08 |
| 26 | 275 | 124.74 | 365 | 165.56 |
| 30 | 367 | 166.47 | 488 | 221.35 |
| 36 | 531 | 240.86 | 706 | 320.24 |
45 Degree Elbow Cutting Formula
- R1 = elbow radius marking 1
- R2 = elbow radius marking 2
- R3 = elbow radius marking 3
EC = Elbow Center
OD = Outside Daimeter
R2 = Both Side Radius Marking
45 Degree Elbow Take Off Formula
(R1) – tan x 1 x (EC – 1/2 Z) x Deg = answar
(R2) – tan x 1 x EC … x Deg = answar
(R3) – tan x 1 (EC + 1/2 Z) x deg = answar
