Pemasok Pipa Stainless Steel Wenzhou Kaixin Cina
A butt weld 45 degree long radius elbow is a type of pipe fitting that is used to change the direction of the flow in a piping system by 45 derajat. It is designed with a long radius, which means that the curvature of the elbow is relatively gentle, allowing for a smoother flow of fluid through the system. Pengelasan pantat 45 degree long radius elbows are made by welding two pipes or tubes together at a 45 sudut derajat, with the weld seam being flush with the surface of the elbow. They are commonly used in industries such as oil and gas, petrochemicals, and power generation to connect pipes and redirect the flow of fluids around obstacles or through corners.
Butt weld Fitting 45° Long Radius Elbow Specification
| Standar | ANSI/ASME :ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43.
DARI : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 DI DALAM : EN10253-1, EN10253-2 |
| Jadwal | Jadwalkan 5S, 10S, 20S, S10, S20, S30, PMS, 40S, S40, S60, X, 80S, S80, S100, S120, S140, S160, XXS dan lain-lain. |
| Ukuran | Seamless 45° Long Radius Elbow Size: 1/2″~24″
hektar / Lasan / Fabricated 45° Long Radius Elbow Size: 1/2″ (15 Catatan) ke 48″ (1200Catatan) |
| Nilai | 304/W/H/LN, 316/L/H/LN/Ti, 321/H, 317/L/LN, 347/H, 310S/H, N08904(904L), S31803,S32205, S32750, S32760, N02200, N02201, N04400, N06600, N06690, N06625, N06985(G3), N08028, N08800, N08810, N08811, N08825Permukaan |
| Jenis | Pengelasan Bokong (BW) / Lasan / hektar / Dibuat |
| Dimensi | ANSI B16.9, ANSI B16.28, MSS-SP-43 Tipe A, MSS-SP-43 Tipe B, |
Butt weld Fitting 45° Long Radius Elbow BAHAN & KELAS
| Buttweld Baja Tahan Karat 45 Derajat Siku Radius Panjang | ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DARI 1.4301, DIN1.4306, DARI 1.4401, DARI 1.4404 |
| Rangkap & Buttweld Baja Super Dupleks 45 Derajat Siku Radius Panjang | ASTM A 815, ASME SA 815 UNS NO S31803, S32205. S32750 AS, S32950. Nomor Bahan. 1.4462 |
| Buttweld Baja Karbon 45 Derajat Siku Radius Panjang | ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70. |
| Baja Karbon Suhu Rendah 45 Derajat Siku Radius Panjang | ASTM A420 WPL3, A420 WPL6 |
| Buttweld Baja Paduan 45 Derajat Siku Radius Panjang | ASTM / ASME A/S.A 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 |
| Buttweld Paduan Nikel 45 Derajat Siku Radius Panjang | ASTM B336, ASME SB336, Nikel 200 (UNS no. No2200), Nikel 201 (UNS no. N02201), Monel 400 (UNS no. N04400), Monel 500 (UNS no. N05500), tidak konel 800 (UNS no. N08800), tidak konel 825 (UNS no. N08825), tidak konel 600 (UNS no. N06600), tidak konel 625 (UNS no. N06625), tidak konel 601 (UNS no. N06601), Hastelloy C 276 (UNS no. N10276), Paduan 20 (UNS no. N08020), titanium (kelas I & II), Cupro-Nikel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe. |
Aplikasi dari 45 DERAJAT PANJANG RADIUS SIKU
- Stainless Steel 45° Long Radius Elbow uses in Oil and Gas Pipeline
- 45° Buttweld LR Elbow uses in Chemical Industry
- Alloy Steel 45° Long Radius Elbow uses in Plumbing
- 45° Long Radius Elbow Pipe Fittings uses in Food Processing Industry
- Buttweld 45° LR Elbow uses in Structural Pipe
- ANSI B16.9 Buttweld 45° Long Radius Elbow uses in Power Plant
- 45° Long Radius Pipe Elbow uses in Paper & Pulp Industry
- 45 Deg Long Radius Bend uses in Heating
- 45 Degree Long Radius Reducing Elbow uses in Water Supply Systems
- ASME B16.9 Long Radius 45 Deg Elbow uses in General Purpose Applications
- 45° LR Elbow uses in Fabrication Industry
45 Deg Long Radius Elbow Ukuran
Buttweld 45 Degree Long Radius Elbow Dimension Drawing
| NPC | O.D.
D |
90 derajat
Long Radius Pusat-ke-Ujung A |
45 derajat
Long Radius Pusat-ke-Ujung B |
90 derajat
3D Pusat-ke-Ujung A |
45 derajat
3D Pusat-ke-Ujung B |
| 1/2 | 21.3 | 38 | 16 | – | – |
| 3/4 | 26.7 | 38 | 19 | 57 | 24 |
| 1 | 33.4 | 38 | 22 | 76 | 31 |
| 1 ¼ | 42.2 | 48 | 25 | 95 | 39 |
| 1 ½ | 48.3 | 57 | 29 | 114 | 47 |
| 2 | 60.3 | 76 | 35 | 152 | 63 |
| 2 ½ | 73 | 95 | 44 | 190 | 79 |
| 3 | 88.9 | 114 | 51 | 229 | 95 |
| 3 ½ | 101.6 | 133 | 57 | 267 | 111 |
| 4 | 114.3 | 152 | 64 | 305 | 127 |
| 5 | 141.3 | 190 | 79 | 381 | 157 |
| 6 | 168.3 | 229 | 95 | 457 | 189 |
| 8 | 219.1 | 305 | 127 | 610 | 252 |
| 10 | 273 | 381 | 159 | 762 | 316 |
| 12 | 323.8 | 457 | 190 | 914 | 378 |
| 14 | 355.6 | 533 | 222 | 1067 | 441 |
| 16 | 406.4 | 610 | 254 | 1219 | 505 |
| 18 | 457 | 686 | 286 | 1372 | 568 |
| 20 | 508 | 762 | 318 | 1524 | 632 |
| 22 | 559 | 838 | 343 | 1676 | 694 |
| 24 | 610 | 914 | 381 | 1829 | 757 |
| 26 | 660 | 991 | 406 | 1981 | 821 |
| 28 | 711 | 1067 | 438 | 2134 | 883 |
| 30 | 762 | 1143 | 470 | 2286 | 964 |
| 32 | 813 | 1219 | 502 | 2438 | 1010 |
| 34 | 864 | 1295 | 533 | 2591 | 1073 |
| 36 | 914 | 1372 | 565 | 2743 | 1135 |
| 38 | 965 | 1448 | 600 | 2896 | 1200 |
| 40 | 1016 | 1524 | 632 | 3048 | 1264 |
| 42 | 1067 | 1600 | 660 | 3200 | 1326 |
| 44 | 1118 | 1676 | 695 | 3353 | 1389 |
| 46 | 1168 | 1753 | 727 | 3505 | 1453 |
| 48 | 1219 | 1829 | 759 | 3658 | 1516 |
TOLERANSI DIMENSI 45 DEGREE LONG RADIUS ELBOW – ASME B16.9
| TOLERANSI DIMENSI – SIKU | |||||||
| Untuk semua perlengkapan | Siku 90/45 derajat | 180° Kembali | |||||
| Ukuran Pipa Nominal (NPC) | Di luar Ø
di Bevel |
Di dalam Ø
di Akhir |
Ketebalan dinding
T / t1 |
Pusat ke Ujung Redup. A-B-C-M | Pusat ke Pusat Redup.
HAI |
Kembali ke Wajah Redup.
K |
Meluruskan- ment dari Berakhir
kamu |
| 1/2 A 2 1/2 | 1 | 0,8 | Bukan | 2 | 7 | 7 | 1 |
| 3 A 3 1/2 | 1 | 1,6 | lebih sedikit | 2 | 7 | 7 | 1 |
| 4 | +2 -1 | 1,6 | dibandingkan | 2 | 7 | 7 | 1 |
| 5 A 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
| 8 | 2 | 1,6 | dari nominal | 2 | 7 | 7 | 1 |
| 10 | +4 -3 | 3,2 | rasa geli | 2 | 7 | 7 | 2 |
| 12 A 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
| 20 A 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
| 26 A 30 | +7 -5 | 4,8 | 3 | ….. | ….. | ….. | |
| 32 A 48 | +7 -5 | 4,8 | 5 | ….. | ….. | ….. | |
TOLERANSI ANGULARITAS 45 DERAJAT PANJANG RADIUS SIKU
| Toleransi Angularitas | ||
| tidak | Sudut maksimal | Maks turun dari pesawat |
| Q | P | |
| 1/2 A 4 | 1 | 2 |
| 5 A 8 | 2 | 4 |
| 10 A 12 | 3 | 5 |
| 14 A 16 | 3 | 7 |
| 18 A 24 | 4 | 10 |
| 26 A 30 | 5 | 10 |
| 32 A 42 | 5 | 13 |
| 44 A 48 | 5 | 20 |
JENIS YANG TERSEDIA 45 DERAJAT PANJANG RADIUS SIKU
| Buttweld 45° Long Radius Elbow | Duplex Steel Buttweld 45° Long Radius Elbow |
| ASME B16.9 Butt weld 45° Long Radius Elbow | High Nickel Alloy 45° Long Radius Elbow |
| Stainless Steel 45° Long Radius Elbow | SS 45° Long Radius Elbow |
| High Quality 45° Long Radius Elbow | Seamless Butt weld 45° Long Radius Elbow |
| Welded Butt weld 45° Long Radius Elbowr | ASME B16.28 Buttweld 45° Long Radius Elbow |
| Carbon Steel 45° Long Radius Elbow | ANSI B16.9 Buttweld 45° Long Radius Elbow |
| Titanium Buttweld 45° Long Radius Elbow | Inconel Butt weld 45° Long Radius Elbow |
| ASTM A403 Stainless Steel 45° Long Radius Elbow | Butt Weld B16.9 45° Long Radius Elbow |
| Super Duplex Steel Buttweld 45° Long Radius Elbow | Copper Nickel 45° Long Radius Elbow |
| Steel 45° Long Radius Elbow | Hastelloy 45° Siku Radius Panjang |
WEIGHT OF 45 Deg Long Radius Elbow
Buttweld Elbow Berat in LBS and KG
| Type-> | SCHEDULE STD | SCHEDULE XS |
| NPC | LBS | KG | LBS | KG |
| 1/2 | 0.09 | 0.04 | 0.19 | 0.09 |
| 3/4 | 0.09 | 0.04 | 0.19 | 0.09 |
| 1 | 0.25 | 0.11 | 0.31 | 0.14 |
| 1 ¼ | 0.38 | 0.17 | 0.5 | 0.23 |
| 1 ½ | 0.4 | 0.18 | 0.69 | 0.31 |
| 2 | 0.81 | 0.37 | 1.19 | 0.54 |
| 2 ½ | 1.75 | 0.79 | 2.13 | 0.97 |
| 3 | 2.63 | 1.19 | 3.5 | 1.59 |
| 3 ½ | 3.5 | 1.59 | 4.5 | 2.04 |
| 4 | 4.5 | 2.04 | 6.1 | 2.77 |
| 5 | 7.5 | 3.4 | 10.7 | 4.85 |
| 6 | 12 | 5.44 | 17.5 | 7.94 |
| 8 | 23 | 10.43 | 35 | 15.88 |
| 10 | 43 | 19.5 | 53 | 24.04 |
| 12 | 62 | 28.12 | 84 | 38.1 |
| 14 | 80 | 36.29 | 100 | 45.36 |
| 16 | 100 | 45.36 | 135 | 61.23 |
| 18 | 126 | 57.15 | 167 | 75.75 |
| 20 | 160 | 72.57 | 206 | 93.44 |
| 22 | 197 | 89.36 | 260 | 117.93 |
| 24 | 238 | 107.95 | 300 | 136.08 |
| 26 | 275 | 124.74 | 365 | 165.56 |
| 30 | 367 | 166.47 | 488 | 221.35 |
| 36 | 531 | 240.86 | 706 | 320.24 |
45 Rumus Pemotongan Siku Derajat
- R1 = penandaan radius siku 1
- R2 = penandaan radius siku 2
- R3 = penandaan radius siku 3
EC = Siku Tengah
OD = Daimeter Luar
R2 = Penandaan Radius Kedua Sisi
45 Rumus Lepas Siku Derajat
(R1) – jadi x 1 X (EC – 1/2 DARI) x Kamu = tanggung jawab
(R2) – jadi x 1 x EC … x Kamu = tanggung jawab
(R3) – jadi x 1 (EC + 1/2 DARI) x kamu = tanggung jawab
