A butt weld 45 degree long radius elbow is a type of pipe fitting that is used to change the direction of the flow in a piping system by 45 gradi. It is designed with a long radius, which means that the curvature of the elbow is relatively gentle, allowing for a smoother flow of fluid through the system. Butt weld 45 degree long radius elbows are made by welding two pipes or tubes together at a 45 degree angle, with the weld seam being flush with the surface of the elbow. They are commonly used in industries such as oil and gas, petrochemicals, and power generation to connect pipes and redirect the flow of fluids around obstacles or through corners.
Butt weld Fitting 45° Long Radius Elbow Specification
Standard | ANSI/ASME :ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43.
DA : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 IN : EN10253-1, EN10253-2 |
Programma | Programma 5S, 10S, 20S, S10, S20, S30, ST, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS e così via. |
Dimensioni | Seamless 45° Long Radius Elbow Size: 1/2″~24″
ACRI / Saldato / Fabricated 45° Long Radius Elbow Size: 1/2″ (15 NB) to 48″ (1200NB) |
gradi | 304/L/H/LN, 316/L/H/LN/Ti, 321/H, 317/L/LN, 347/H, 310S/H, N08904(904l), S31803,S32205, S32750, S32760, N02200, N02201, N04400, N06600, N06690, N06625, N06985(G3), N08028, N08800, N08810, N08811, N08825Superficie |
Tipo | Saldatura di testa (BW) / Saldato / ACRI / Fabbricato |
Dimensione | ANSI B16.9, ANSI B16.28, MSS-SP-43 Tipo A, MSS-SP-43 Tipo B, |
Butt weld Fitting 45° Long Radius Elbow MATERIAL & GRADI
Saldatura di testa in acciaio inossidabile 45 Gomito a raggio lungo di grado | ASTM A403 WP316/316l, ASTM A403SA / UN 774 WP-S, WP-W, WP-WX304/304L, ASTM A182 F316L, 304l, DA 1.4301, DIN1.4306, DA 1.4401, DA 1.4404 |
Duplex & Saldatura di testa in acciaio super duplex 45 Gomito a raggio lungo di grado | ASTM A 815, ASME SA 815 USA N. S31803, S32205. USA S32750, S32950. Materiale n. 1.4462 |
Saldatura di testa in acciaio al carbonio 45 Gomito a raggio lungo di grado | ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70. |
Acciaio al carbonio a bassa temperatura 45 Gomito a raggio lungo di grado | ASTM A420 WPL3, A420WPL6 |
Saldatura di testa in acciaio legato 45 Gomito a raggio lungo di grado | ASTM / ASME A/SA 234 gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 |
Saldatura di testa in lega di nichel 45 Gomito a raggio lungo di grado | ASTM B336, ASME SB336, Nichel 200 (UNS n. No2200), Nichel 201 (UNS n. N02201), Monel 400 (UNS n. N04400), Monel 500 (UNS n. N05500), Inconel 800 (UNS n. N08800), Inconel 825 (UNS n. N08825), Inconel 600 (UNS n. N06600), Inconel 625 (UNS n. N06625), Inconel 601 (UNS n. N06601), Hastelloy C 276 (UNS n. N10276), Lega 20 (UNS n. N08020), Titanio (Grado I & II), Cupro-nichel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe. |
Applications of 45 GOMITO A LUNGO RAGGIO DI GRADO
- Stainless Steel 45° Long Radius Elbow uses in Oil and Gas Pipeline
- 45° Buttweld LR Elbow uses in Chemical Industry
- Alloy Steel 45° Long Radius Elbow uses in Plumbing
- 45° Long Radius Elbow Pipe Fittings uses in Food Processing Industry
- Buttweld 45° LR Elbow uses in Structural Pipe
- ANSI B16.9 Buttweld 45° Long Radius Elbow uses in Power Plant
- 45° Long Radius Pipe Elbow uses in Paper & Pulp Industry
- 45 Deg Long Radius Bend uses in Heating
- 45 Degree Long Radius Reducing Elbow uses in Water Supply Systems
- ASME B16.9 Long Radius 45 Deg Elbow uses in General Purpose Applications
- 45° LR Elbow uses in Fabrication Industry
45 Deg Long Radius Elbow Dimensioni
NPS | O.D.
D |
90 gradi
Long Radius Center-to-End UN |
45 gradi
Long Radius Center-to-End B |
90 gradi
3D Center-to-End UN |
45 gradi
3D Center-to-End B |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1 ¼ | 42.2 | 48 | 25 | 95 | 39 |
1 ½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2 ½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3 ½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
DIMENSIONAL TOLERANCES OF 45 DEGREE LONG RADIUS ELBOW – ASME B16.9
DIMENSIONAL TOLERANCES – ELBOWS | |||||||
For all fittings | Gomiti 90/45 grado | 180° Returns | |||||
Dimensione nominale del tubo (NPS) | Ø esterno
a Bevel |
Ø interno
alla fine |
Spessore del muro
T / t1 |
Dal centro alla fine Dim. A-B-C-M | Center to Center Dim.
O |
Back to Face Dim.
K |
Align- ment of Ends
U |
1/2 UN 2 1/2 | 1 | 0,8 | Non | 2 | 7 | 7 | 1 |
3 UN 3 1/2 | 1 | 1,6 | meno | 2 | 7 | 7 | 1 |
4 | +2 -1 | 1,6 | di | 2 | 7 | 7 | 1 |
5 UN 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
8 | 2 | 1,6 | di nominale | 2 | 7 | 7 | 1 |
10 | +4 -3 | 3,2 | spessore | 2 | 7 | 7 | 2 |
12 UN 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
20 UN 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
26 UN 30 | +7 -5 | 4,8 | 3 | ….. | ….. | ….. | |
32 UN 48 | +7 -5 | 4,8 | 5 | ….. | ….. | ….. |
ANGULARITY TOLERANCES OF 45 GOMITO A LUNGO RAGGIO DI GRADO
Angularity Tolerances | ||
ND | Angolo massimo | Max fuori dall'aereo |
Q | P | |
1/2 UN 4 | 1 | 2 |
5 UN 8 | 2 | 4 |
10 UN 12 | 3 | 5 |
14 UN 16 | 3 | 7 |
18 UN 24 | 4 | 10 |
26 UN 30 | 5 | 10 |
32 UN 42 | 5 | 13 |
44 UN 48 | 5 | 20 |
TIPOLOGIE DISPONIBILI DI 45 GOMITO A LUNGO RAGGIO DI GRADO
Buttweld 45° Long Radius Elbow | Duplex Steel Buttweld 45° Long Radius Elbow |
ASME B16.9 Butt weld 45° Long Radius Elbow | High Nickel Alloy 45° Long Radius Elbow |
Stainless Steel 45° Long Radius Elbow | SS 45° Long Radius Elbow |
High Quality 45° Long Radius Elbow | Seamless Butt weld 45° Long Radius Elbow |
Welded Butt weld 45° Long Radius Elbowr | ASME B16.28 Buttweld 45° Long Radius Elbow |
Carbon Steel 45° Long Radius Elbow | ANSI B16.9 Buttweld 45° Long Radius Elbow |
Titanium Buttweld 45° Long Radius Elbow | Inconel Butt weld 45° Long Radius Elbow |
ASTM A403 Stainless Steel 45° Long Radius Elbow | Butt Weld B16.9 45° Long Radius Elbow |
Super Duplex Steel Buttweld 45° Long Radius Elbow | Copper Nickel 45° Long Radius Elbow |
Steel 45° Long Radius Elbow | Hastelloy 45° Gomito a lungo raggio |
WEIGHT OF 45 Deg Long Radius Elbow
Buttweld Elbow Weight in LBS and KG
Type-> | SCHEDULE STD | SCHEDULE XS |
NPS | LBS | KG | LBS | KG |
1/2 | 0.09 | 0.04 | 0.19 | 0.09 |
3/4 | 0.09 | 0.04 | 0.19 | 0.09 |
1 | 0.25 | 0.11 | 0.31 | 0.14 |
1 ¼ | 0.38 | 0.17 | 0.5 | 0.23 |
1 ½ | 0.4 | 0.18 | 0.69 | 0.31 |
2 | 0.81 | 0.37 | 1.19 | 0.54 |
2 ½ | 1.75 | 0.79 | 2.13 | 0.97 |
3 | 2.63 | 1.19 | 3.5 | 1.59 |
3 ½ | 3.5 | 1.59 | 4.5 | 2.04 |
4 | 4.5 | 2.04 | 6.1 | 2.77 |
5 | 7.5 | 3.4 | 10.7 | 4.85 |
6 | 12 | 5.44 | 17.5 | 7.94 |
8 | 23 | 10.43 | 35 | 15.88 |
10 | 43 | 19.5 | 53 | 24.04 |
12 | 62 | 28.12 | 84 | 38.1 |
14 | 80 | 36.29 | 100 | 45.36 |
16 | 100 | 45.36 | 135 | 61.23 |
18 | 126 | 57.15 | 167 | 75.75 |
20 | 160 | 72.57 | 206 | 93.44 |
22 | 197 | 89.36 | 260 | 117.93 |
24 | 238 | 107.95 | 300 | 136.08 |
26 | 275 | 124.74 | 365 | 165.56 |
30 | 367 | 166.47 | 488 | 221.35 |
36 | 531 | 240.86 | 706 | 320.24 |
45 Degree Elbow Cutting Formula
- R1 = elbow radius marking 1
- R2 = elbow radius marking 2
- R3 = elbow radius marking 3
EC = Elbow Center
OD = Outside Daimeter
R2 = Both Side Radius Marking
45 Degree Elbow Take Off Formula
(R1) – tan x 1 x (EC – 1/2 DI) x Deg = answar
(R2) – tan x 1 x EC … x Deg = answar
(R3) – tan x 1 (EC + 1/2 DI) x deg = answar