Dostawca rur ze stali nierdzewnej Wenzhou Kaixin Chiny
A butt weld 45 degree long radius elbow is a type of pipe fitting that is used to change the direction of the flow in a piping system by 45 stopnie. It is designed with a long radius, which means that the curvature of the elbow is relatively gentle, allowing for a smoother flow of fluid through the system. Butt weld 45 degree long radius elbows are made by welding two pipes or tubes together at a 45 degree angle, with the weld seam being flush with the surface of the elbow. They are commonly used in industries such as oil and gas, petrochemicals, and power generation to connect pipes and redirect the flow of fluids around obstacles or through corners.
Butt weld Fitting 45° Long Radius Elbow Specification
| Standardy | ANSI/ASME :ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43.
Z : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 W : EN10253-1, EN10253-2 |
| Harmonogram | Harmonogram 5s, 10S, 20S, S10, S20, S30, Std, 40S, S40, S60, Xs, 80S, S80, S100, S120, S140, S160, XXS i itp. |
| Rozmiary | Seamless 45° Long Radius Elbow Size: 1/2″~24″
Erw / Spawany / Fabricated 45° Long Radius Elbow Size: 1/2″ (15 Uwaga) do 48″ (1200Uwaga) |
| Grades | 304/L/h/ln, 316/L/h/ln/ti, 321/H, 317/L/ln, 347/H, 310S/H, N08904(904L), S31803, S32205, S32750, S32760, N02200, N02201, N04400, N06600, N06690, N06625, N06985(G3), N08028, N08800, N08810, N08811, N08825Surface |
| Typ | Spawana (BW) / Spawany / Erw / Sfabrykowany |
| Dimension | ANSI B16.9, ANSI B16.28, MSS-SP-43 Typ A., MSS-SP-43 Typ B., |
Butt weld Fitting 45° Long Radius Elbow MATERIAL & Oceny
| Stal nierdzewna 45 Kolano o dużym promieniu | ASTM A403 WP316/316L, ASTM A403 To / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, Z 1.4301, DIN1.4306, Z 1.4401, Z 1.4404 |
| Dupleks & Super dupleks stalowy buttweld 45 Kolano o dużym promieniu | ASTM A 815, Asme to 815 No S31803, S32205. US S32750, S32950. Materiał nr. 1.4462 |
| Stalowa stalowa buttweld 45 Kolano o dużym promieniu | ASTM A234, ASME SA234 WPB , WPBW, Wphy 42, Wphy 46, Wphy 52, Wph 60, Wphy 65 & Wphy 70. |
| Stal węglowa w niskiej temperaturze 45 Kolano o dużym promieniu | ASTM A420 WPL3, A420 WPL6 |
| Stalowa stalowa buttweld 45 Kolano o dużym promieniu | ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 |
| ALLOY NIKLEL BUTTWELD 45 Kolano o dużym promieniu | ASTM B336, ASME SB336, Nikiel 200 (Nas nie. NO2200), Nikiel 201 (Nas nie. N02201), Monel 400 (Nas nie. N04400), Monel 500 (Nas nie. N05500), Niewygod 800 (Nas nie. N08800), Niewygod 825 (Nas nie. N08825), Niewygod 600 (Nas nie. N06600), Niewygod 625 (Nas nie. N06625), Niewygod 601 (Nas nie. N06601), Hastelloy c 276 (Nas nie. N10276), Stop 20 (Nas nie. N08020), Tytan (Klasa I. & Ii), Cupro-Nickel 70/30, CUNI10FE1MN, CUNI30MN1FE. |
Applications of 45 Elbow z długim promieniem
- Stainless Steel 45° Long Radius Elbow uses in Oil and Gas Pipeline
- 45° Buttweld LR Elbow uses in Chemical Industry
- Alloy Steel 45° Long Radius Elbow uses in Plumbing
- 45° Long Radius Elbow Pipe Fittings uses in Food Processing Industry
- Buttweld 45° LR Elbow uses in Structural Pipe
- ANSI B16.9 Buttweld 45° Long Radius Elbow uses in Power Plant
- 45° Long Radius Pipe Elbow uses in Paper & Pulp Industry
- 45 Deg Long Radius Bend uses in Heating
- 45 Degree Long Radius Reducing Elbow uses in Water Supply Systems
- ASME B16.9 Long Radius 45 Deg Elbow uses in General Purpose Applications
- 45° LR Elbow uses in Fabrication Industry
45 Deg Long Radius Elbow Wymiary
Zgrzewanie doczołowe 45 Degree Long Radius Elbow Dimension Drawing
| NPS | O.D.
D |
90 stopnie
Long Radius Center-to-End A |
45 stopnie
Long Radius Center-to-End B |
90 stopnie
3D Center-to-End A |
45 stopnie
3D Center-to-End B |
| 1/2 | 21.3 | 38 | 16 | – | – |
| 3/4 | 26.7 | 38 | 19 | 57 | 24 |
| 1 | 33.4 | 38 | 22 | 76 | 31 |
| 1 ¼ | 42.2 | 48 | 25 | 95 | 39 |
| 1 ½ | 48.3 | 57 | 29 | 114 | 47 |
| 2 | 60.3 | 76 | 35 | 152 | 63 |
| 2 ½ | 73 | 95 | 44 | 190 | 79 |
| 3 | 88.9 | 114 | 51 | 229 | 95 |
| 3 ½ | 101.6 | 133 | 57 | 267 | 111 |
| 4 | 114.3 | 152 | 64 | 305 | 127 |
| 5 | 141.3 | 190 | 79 | 381 | 157 |
| 6 | 168.3 | 229 | 95 | 457 | 189 |
| 8 | 219.1 | 305 | 127 | 610 | 252 |
| 10 | 273 | 381 | 159 | 762 | 316 |
| 12 | 323.8 | 457 | 190 | 914 | 378 |
| 14 | 355.6 | 533 | 222 | 1067 | 441 |
| 16 | 406.4 | 610 | 254 | 1219 | 505 |
| 18 | 457 | 686 | 286 | 1372 | 568 |
| 20 | 508 | 762 | 318 | 1524 | 632 |
| 22 | 559 | 838 | 343 | 1676 | 694 |
| 24 | 610 | 914 | 381 | 1829 | 757 |
| 26 | 660 | 991 | 406 | 1981 | 821 |
| 28 | 711 | 1067 | 438 | 2134 | 883 |
| 30 | 762 | 1143 | 470 | 2286 | 964 |
| 32 | 813 | 1219 | 502 | 2438 | 1010 |
| 34 | 864 | 1295 | 533 | 2591 | 1073 |
| 36 | 914 | 1372 | 565 | 2743 | 1135 |
| 38 | 965 | 1448 | 600 | 2896 | 1200 |
| 40 | 1016 | 1524 | 632 | 3048 | 1264 |
| 42 | 1067 | 1600 | 660 | 3200 | 1326 |
| 44 | 1118 | 1676 | 695 | 3353 | 1389 |
| 46 | 1168 | 1753 | 727 | 3505 | 1453 |
| 48 | 1219 | 1829 | 759 | 3658 | 1516 |
DIMENSIONAL TOLERANCES OF 45 DEGREE LONG RADIUS ELBOW – ASME B16.9
| DIMENSIONAL TOLERANCES – ELBOWS | |||||||
| For all fittings | Łokcie 90/45 deg | 180° Returns | |||||
| Nominalny rozmiar rury (NPS) | Na zewnątrz Ø
w Bevel |
Wewnątrz Ø
na końcu |
Grubość ściany
T / T1 |
Środek do końca. A-B-C-M | Center to Center Dim.
O |
Back to Face Dim.
K |
Align- ment of Ends
U |
| 1/2 A 2 1/2 | 1 | 0,8 | Nie | 2 | 7 | 7 | 1 |
| 3 A 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
| 4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
| 5 A 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
| 8 | 2 | 1,6 | nominałów | 2 | 7 | 7 | 1 |
| 10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
| 12 A 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
| 20 A 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
| 26 A 30 | +7 -5 | 4,8 | 3 | ….. | ….. | ….. | |
| 32 A 48 | +7 -5 | 4,8 | 5 | ….. | ….. | ….. | |
ANGULARITY TOLERANCES OF 45 Elbow z długim promieniem
| Angularity Tolerances | ||
| Nd | Maksymalnie nie pod kątem | Maksymalny samolot |
| Q | P | |
| 1/2 A 4 | 1 | 2 |
| 5 A 8 | 2 | 4 |
| 10 A 12 | 3 | 5 |
| 14 A 16 | 3 | 7 |
| 18 A 24 | 4 | 10 |
| 26 A 30 | 5 | 10 |
| 32 A 42 | 5 | 13 |
| 44 A 48 | 5 | 20 |
Dostępne rodzaje 45 Elbow z długim promieniem
| Buttweld 45° Long Radius Elbow | Duplex Steel Buttweld 45° Long Radius Elbow |
| ASME B16.9 Butt weld 45° Long Radius Elbow | High Nickel Alloy 45° Long Radius Elbow |
| Stainless Steel 45° Long Radius Elbow | SS 45° Long Radius Elbow |
| High Quality 45° Long Radius Elbow | Seamless Butt weld 45° Long Radius Elbow |
| Welded Butt weld 45° Long Radius Elbowr | ASME B16.28 Buttweld 45° Long Radius Elbow |
| Carbon Steel 45° Long Radius Elbow | ANSI B16.9 Buttweld 45° Long Radius Elbow |
| Titanium Buttweld 45° Long Radius Elbow | Inconel Butt weld 45° Long Radius Elbow |
| ASTM A403 Stainless Steel 45° Long Radius Elbow | Butt Weld B16.9 45° Long Radius Elbow |
| Super Duplex Steel Buttweld 45° Long Radius Elbow | Copper Nickel 45° Long Radius Elbow |
| Steel 45° Long Radius Elbow | Hastelloy 45° Długi promień łokieć |
WEIGHT OF 45 Deg Long Radius Elbow
Buttweld Elbow Weight in LBS and KG
| Type-> | SCHEDULE STD | SCHEDULE XS |
| NPS | LBS | KG | LBS | KG |
| 1/2 | 0.09 | 0.04 | 0.19 | 0.09 |
| 3/4 | 0.09 | 0.04 | 0.19 | 0.09 |
| 1 | 0.25 | 0.11 | 0.31 | 0.14 |
| 1 ¼ | 0.38 | 0.17 | 0.5 | 0.23 |
| 1 ½ | 0.4 | 0.18 | 0.69 | 0.31 |
| 2 | 0.81 | 0.37 | 1.19 | 0.54 |
| 2 ½ | 1.75 | 0.79 | 2.13 | 0.97 |
| 3 | 2.63 | 1.19 | 3.5 | 1.59 |
| 3 ½ | 3.5 | 1.59 | 4.5 | 2.04 |
| 4 | 4.5 | 2.04 | 6.1 | 2.77 |
| 5 | 7.5 | 3.4 | 10.7 | 4.85 |
| 6 | 12 | 5.44 | 17.5 | 7.94 |
| 8 | 23 | 10.43 | 35 | 15.88 |
| 10 | 43 | 19.5 | 53 | 24.04 |
| 12 | 62 | 28.12 | 84 | 38.1 |
| 14 | 80 | 36.29 | 100 | 45.36 |
| 16 | 100 | 45.36 | 135 | 61.23 |
| 18 | 126 | 57.15 | 167 | 75.75 |
| 20 | 160 | 72.57 | 206 | 93.44 |
| 22 | 197 | 89.36 | 260 | 117.93 |
| 24 | 238 | 107.95 | 300 | 136.08 |
| 26 | 275 | 124.74 | 365 | 165.56 |
| 30 | 367 | 166.47 | 488 | 221.35 |
| 36 | 531 | 240.86 | 706 | 320.24 |
45 Degree Elbow Cutting Formula
- R1 = elbow radius marking 1
- R2 = elbow radius marking 2
- R3 = elbow radius marking 3
EC = Elbow Center
OD = Outside Daimeter
R2 = Both Side Radius Marking
45 Degree Elbow Take Off Formula
(R1) – tan x 1 x (EC – 1/2 Z) x Deg = answar
(R2) – tan x 1 x EC … x Deg = answar
(R3) – tan x 1 (EC + 1/2 Z) x deg = answar
