不锈钢管供应商温州凯信中国
What is stainless steel 316？
不锈钢 316 is a type of austenitic stainless steel that contains molybdenum. 1.4404 is corrosion-resistant and has higher resistance to pitting and crevice corrosion in chloride environments compared to other grades of stainless steel. It also has good weldability and high temperature strength. It is commonly used in applications such as chemical processing, marine environments, and medical equipment manufacturing.
1.4404 is an acid-resisting austenitic stainless steel with 16% 铬, 12% Ni and 2,0% 莫. Due to its Mo content, this material has a significantly improved corrosion resistance compared to stainless steels. 1.4404 is resistant to reducing action of organic and inorganic acids as well as against halogen-containing media. 此外, this steel is less susceptible to pitting. The low carbon content also improves the resistance to intergranular corrosion and allows use at higher temperatures up to 450 ° C in continuous operation. 1.4404 can be cold worked and weld excellent. This material is mainly used in the chemical, textile and paper industries, and is often used in apparatus, in sanitary industry and in pipe fabrication.
Formed type and products of Stainless steel 316
- 床单
- 条
- 管子
- 酒吧
- 管道
- 盘子
- 配件 & 法兰
申请 316 不锈钢
Brewing and dairy equipment, evaporators, drums, barrels, 热交换器, chemical and food processing, water treatment plant, chemical processing equipment, architectural and boat fittings exposed to marine and polluted atmospheres are typical uses for grade 316 不锈钢.
同等等级 316
| 欧洲联盟 在 | 美国 – | 德国 从,WNr | 日本 他 | 法国 AFNOR | 英格兰 学士 | 意大利 大学 | 中国 国标 | 瑞典 SS | 捷克 南航 | 奥地利 奥诺玛 | 俄罗斯 国家标准 |
| X5CrNiMo17-12-2 (1.4401) | 316 | X5CrNiMo17-12-2 | SUS316 | Z6CND17-11Z7CND17-11-02Z7CND17-12-02 | 316S31 | X5CrNiMo17-12 | 0Cr17Ni12Mo2 | 2347 | 17346 | X5CrNiMo17-12-2KW | 08KH16N11M3 |
成分范围为 316 grade of stainless steels
| 年级 | C | 锰 | 和 | 磷 | S | 铬 | 莫 | 在 | 氮 | |
|---|---|---|---|---|---|---|---|---|---|---|
| 316 | 最小 | – | – | – | 0 | – | 16.0 | 2.00 | 10.0 | – |
| 最大限度 | 0.08 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | 0.10 | |
| 316L | 最小 | – | – | – | – | – | 16.0 | 2.00 | 10.0 | – |
| 最大限度 | 0.03 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | 0.10 | |
| 316H | 最小 | 0.04 | 0.04 | 0 | – | – | 16.0 | 2.00 | 10.0 | – |
| 最大限度 | 0.10 | 0.10 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | – |
机械性能
Table 2.Mechanical properties of 316 grade stainless steels.
| 年级 | 拉伸强度 (兆帕) 分钟 | Yield Str 0.2% 证明 (兆帕) 分钟 | Elong (% 在 50 毫米) 分钟 | 硬度 | |
|---|---|---|---|---|---|
| 罗克韦尔B (人力资源B) 最大限度 | 布氏硬度 (HB) 最大限度 | ||||
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
酒吧 & Section – Up to 160mm Dia / 厚度
| Mechanical Property | 价值 |
|---|---|
| Proof Stress | 200 Min MPa |
| 抗拉强度 | 500 到 700 兆帕 |
| Elongation A50 mm | 40 最小 % |
| Hardness Brinell | 215 Max H |
热处理
不锈钢 316 Solution annealing is performed at 1065 – 1120℃, followed by rapid cooling to prevent the precipitation of the chromium carbides. UNS31600 cannot be hardened by heat treatment. Stress relieving is rarely required due to the high ductility of 316.
焊接性
年级 316 stainless steel is readily weldable by most fusion techniques (气体保护焊 / TIG, GMAW / MIG / MAG, MMAW / stick, 锯), with no preheat, postheat or control of interpass temperature needed. It is usually welded with filler metals of the same grade, 316 或316L (or the silicon containing versions) which retains corrosion resistance and strength. These grades are pre-qualified weld metals to AS1554.6:1994 for welding grade 316 to itself.